Description

Resin Craft Key Fob DIY Kit – Just add UV resin

Simply pour, customize and cure! This kit is the fast and easy start to making custom UV resin jewelry in minutes.

You will need some UV resin and a UV light.

Included:
– 1 x Open Bezel;
– 1 x Key Ring;
– 1 bag Mixed gems & charms;
– 1 piece Resin Tape;
– 1 bag Glitter

Instructions:
1. On a protected pour UV resin up to half-way into the silicone mold. Gently remove any bubbles with a toothpick.
2. Carefully layer in glitter with additional UV resin, curing with UV light for 60 seconds in between layers until the mold is almost filled. Lay the crank bail at the edge of the mold with the tail resting in the mold and pour a layer of resin to sea inl the crank bail.
3. Cure in UV light for 1-5 minutes between layers, or until no longer tacky and remove from mold.

CAUTION when handling, cured resin might be HOT!
Caution: Keep out of reach of children. Use resin in a well ventilated area. Avoid contact with skin. May be harmful if swallowed. May cause eye irritation. Not edible. Store in a cool, dry place. Conforms to ASTM D4236 Warning: Not intended for children age 12 and under.